Cruze Baths

Just finished fitting this shower-bath and very pleased with the design. However, I would advise to set the legs higher than in the dimensions description where a top height of 510 mm is given. I set mine to 555 mm to give room beneath to fit a conventional P-trap which accommodates an overflow collar. It is possible to fit a waterless trap with the bath at 510 mm but I can't see how this works with the overflow. Also, the side panel fits neatly under the bath flange with the 555 dimension and the fixing clips attached neatly to the integral chipboard blocks glued to the underside of the bath flange. Note that the item photos show the panel fitting under the flange -- if the 510 mm dimension is used, the panel has to fit on top which doesn't look as neat. I used an integral tap and shower (Item ST0401) which meant that the taps had to be mounted at the shower end. I fitted mine in the corner away from the screen so that the screen can be folded back against the wall without touching the taps. I had to reverse the screen hinges to do this -- but this was not a problem. As described in the paperwork which came with the screen, the panel folds away from the bath which I think is less convenient. I was a bit concerned about access for plumbing to the taps at the far side but there is generous space under the bath (especially with the extra 45 mm build height) so I was able to do up the back nuts OK. Overall, an excellent stylish product -- after a bit of rework.

Vaughan from Oxford

Needed some adjusting due to wall tiles but easy to sort.

Rebecca Verity from North Yorkshire- verified purchaser

Perfect for the p-shaped bath stops spray from ending up all over the floor

Carol Wiggins from Oxfordshire- verified purchaser

Only downside was the instructions could have been clearer.

Michael Adams from - verified purchaser